Maintenance And Storage; After Use / Storage - Bosch Universal Aquatak 1900 Instrucciones De Funcionamiento Y Seguridad

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

ments or repairs. Such preventative safety measures reduce the risk of starting the pressure

washer accidentally.

Maintenance

To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as

loose fixings, and worn or damaged compo-

nents.

Check that covers and guards are undamaged

and correctly fitted. Carry out necessary main-

tenance or repairs before using.

Cleaning

Never use the pressure washer without the fil-

ter or with a dirty or damaged filter. Using the

pressure washer without a filter or with a dirty

or damaged filter may invalidate the warranty.

The clear outer casing 12a on the bosch wa-

ter filter 12 allows the user to see any build-up

of sediment. To clean the filter, first unscrew

it from the machine and push a small screw

driver through the opening to remove the rub-

ber washer 12c and filter barrel 12b. Take care

not to lose them. Wash the pieces under a

tap to remove any sediment. Reassemble by

repositioning the filter barrel 12b within the

clear plastic casing 12a and push the rubber

washer 12c back into place ensuring that it

sits firmly between the filter barrel and screw

thread (Fig. 13).

Take care of your pressure washer when in

use, be sure to keep connections and acces-

sories clean. A metal cleaning pin 11 is includ-

ed with the kit enabling the user to remove any

material that may become lodged (Fig. 14).

After Use / Storage

Turn the main switch to OFF and operate the

trigger to drain the water from the high pres-

sure hose.

Clean the exterior of the machine thoroughly

using a soft brush or cloth. Do not use water,

solvents or polishes.

Remove all debris, especially from the ventila-

tion slots.

F016L81610 1900.indd 14