Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
• Unit will not start.
• Battery pack not installed properly.
• Check battery pack
installation.
• Battery pack not charged.
• Check battery pack
charging requirements.
• Unit starts immediately
• The switch has been
• The switchmust be moved
upon inserting battery,
left inthe "on" position,
to "off"to prevent the tool
from immediately starting
when battery is inserted
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
charger until LED lights.
• Charger not plugged tin.
• Plug charger into a
working outlet. Referto
"Important Charging Notes"
for more details.
• Surrounding air temperature • Move charger and battery
too hot or too cold.
pack to a surrounding air
temperature of above 40
degrees F (4,5°0) or below
105 degrees F (+40,5°C).
• Unit shuts off abruptly.
• Battery pack has reached its •Allow battery pack to cool
maximum thermal limit,
down.
• Out of charge. ( To
• Place on charger and
maximize the life of the
allowto charge.
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
For assistance with your product, visit our website www.blackanddecker.com
for the
location of the service center nearest you or call the BLACK+DECKER
help line at
1=800=544-6986.
Service
information
All BLACK+DECKER
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the BLACK+DECKER
location nearest you. To find your local service location visit www.blackanddecker.com
The RBRC
TM
Seal
The RBRC
TM
(Rechargeable Battery Recycling Corporation) Seal on the
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid
by BLACK+DECKER
In some areas, it is illegal to place spent lithium-ion
batteries in the trash or municipal solid waste stream and the RBRC program
provides an environmentally conscious alternative.
RBRC in cooperation with BLACK+DECKER
and other battery users, has established
programs in the United States and Canada to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve natural resources by returning the tool to
an authorized BLACK+DECKER
service center for recycling. You may also contact your local
recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.
Maintenance
Use only mild soap and damp cloth to clean the toot. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
z_WARNiNG:
The use of any accessory not recommended for use with this tool could
be hazardous.
Recommended
accessories for use with your tool are available from your local dealer
or authorized service center. If you need assistance regarding accessories,
please call:
1-800-544-6986.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
10
Publicidad
