cecotec BOLERO SQUAD V 3001 Manual De Instrucciones página 50

ENGLISH
Please note
- The indicator lights will not light up if ther is no multi-ring heating function.
Shutdown mode: the entire display will turn off except for the residual heat indicator light.
Except if you press and hold the power icon, the rest of the icons will not be activated.
2. Standby mode
- When the hob is switched off, press and hold the power icon for 3 seconds. The hob will
beep and enter standby mode.
- The cooking zone indicator lights will show "0" (the letter "H" will be displayed on the
cooking zone indicator light if there is residual heat, and the decimal point will flash); the
timer display will also show "00".
- In standby mode, each cooking zone can be heated; if no cooking zone is heated the
appliance will automatically switch off after 10 seconds and beep.
3. Switch-off
In standby or heating mode, press and hold the power icon for 3 seconds, a short beep will
sound and the device will switch to off mode. If the surface of the relevant cooking zone
currently has residual heat, the power level indicator display will show "H" and indicate a
residual heat warning.
4. Heating control
- In standby mode, you can choose the cooking zone by pressing the cooking-zone
selection icon. Then, press the "+/-" icons to set the power level. Press and hold the "+/-"
icons to continuously increase or decrease the power level.
- When the cooking zone is heating, long press the power icon for 3 seconds to switch off
and stop heating of the 3 cooking zones. The indicator light of the corresponding cooking
zone that has been heated before will flash and display the high temperature warning
symbol "H".
- In standby mode, if any cooking zone still has residual heat, the display will show the high
temperature symbol.
- If you need to switch off one of the cooking zones, you can select that zone first and
then press the "-" icon to power level "0" to switch off that zone, which will not affect
the heating of the other cooking zones. When the power level reaches "0", the indicator
of the corresponding cooking zone that has been heated up before will show the high
temperature warning symbol.
- If more than one cooking zone is operating at the same time, the total power will be
equal to the sum of the powers of all cooking zones in operation. Each cooking zone will
operate according to its power modulation ratio and will not affect each other.
Notes
50
BOLERO SQUAD V 3001