cecotec BOLERO SQUAD V 3001 Manual De Instrucciones página 51

During cooking, only one function can be activated or one of the icons on the hob can be
selected, i.e., only one decimal point will be displayed.
Press the "-" icon to set the power level to "0"; the hob will automatically switch off.
Each cooking zone has 9 power levels.
5. Multi-ring heating function
5.1. Triple cooking ring function: The outer ring can only be switched on once the inner ring
is switched on.
1) Press the cooking-zone selection icon you wish to heat; the decimal point will be shown
on the display of the corresponding cooking zone.
2) Select the desired power level.
3) Press the triple ring selection icon to activate the outer ring, the corresponding
indicator light of the outer ring cooking zone will light up.
5.2. Triple cooking ring function: The outer ring can only be switched on once the inner ring
is switched on.
1) Press the cooking-zone selection icon you wish to heat; the decimal point will be shown
on the display of the corresponding cooking zone.
2) Select the desired power level.
3) Press the triple ring selection icon to activate the outer ring, the corresponding
indicator light of the outer ring cooking zone will light up.
4) The second ring shall be activated when pressed for the first time, the third ring shall
be activated when pressed for the second time, and the outer ring shall be deactivated
when pressed for the third time.
5.3. Deactivation of the multi-ring cooking function
1) Press the cooking-zone selection icon you wish to heat; the decimal point will be shown
on the display of the corresponding cooking zone.
2) Press the triple ring/multiple ring selection icon to deactivate the outer ring.
6. Setting the power level
- Press the cooking-zone selection icon to choose the corresponding cooking zone, using
the "+/-" icons to adjust the power level.
- Pressing and holding either of these icons will adjust the zone indicator light value up or
down. Each time you press the "+" icon, the power level will increase by one, up to level
9; each time you press the "-" icon, the power level will decrease by one, down to level 0
(each time you press the "+" or "-" icon, a short beep will sound).
- Once the power level adjustment is completed, the decimal point on the display will
stop flashing and will normally display the power level after 10 seconds of inactivity.
- When the power level of any cooking zone is changed to 0, that cooking zone will be
switched off.
- If the power level of all cooking zones is "0", the appliance will automatically switch off
after 1 minute of inactivity.
ENGLISH
BOLERO SQUAD V 3001
51