Publicidad
Idiomas disponibles
Idiomas disponibles
5. Shock-Warning Function (Automatic Mode only)
This feature alerts if the unit has changed position while in
Automatic mode. This may be the result of something striking the
unit, strong winds shifting the unit, or shaking on the ground. It
prevents the rotary laser from auto leveling after it changes height,
thus preventing vertical height errors.
1.
Press
button to start the Auto Detect Shock function. The
LED next to the button will illuminate green. If the rotary laser
is affected by wind, is moved or tilted, the rotary laser will
automatically stop rotating, the laser point will flash, and the LED
next to the button will flash red.
2. To clear the alarm, ensure the rotary laser is back in position, and
press the
unit will enter the automatic mode again to self-level. Reconfirm
the leveling height.
3. Press the
function.
6. Manual Mode Function
This feature allows the rotary laser unit to be placed in an angled
position. It can be used with the unit in either Rotation mode
or Point/Line Segment mode. When the unit is in Manual mode,
accuracy of the device is based on the skill and accuracy of the end
user. When used in this mode, specified accuracy is not applicable.
1.
Press the
MAN
The LED "e" will illuminate a steady green. The automatic leveling
mode is off, and the rotary laser can be placed at any angle.
2. Press the
MAN
return to Automatic mode.
©2023 Johnson Level & Tool
button. The flashing red LED indicator turns off. The
button once to start or remove the shockproof
button for three seconds to enter Manual mode.
X
Y
button for three seconds to exit Manual mode and
X
Y
17
Publicidad
