Display
This is a two-sided laser detector so it can be read from either side
of the unit.
2.
3. Operation
To install batteries into the detector,
open the battery compartment and insert
two "AAA" alkaline batteries according to
the polarity illustrated inside. (Figure 19)
NOTE: Take the batteries out when the unit is not in use for a long
time.
22
1.
LOW BATTERY INDICATOR - Indicates
3.
when batteries need to be replaced.
2. ACCURACY - Indicates coarse or fine
4.
accuracy. Coarse accuracy is ±1/4", and
fine accuracy is ±1/16".
3. AUDIO - Indicates sound is enabled and
indicates volume.
4. BEAM LOCATION INDICATOR -
1.
Indicates the direction to move the
detector to find the laser beam. If no
laser beam is detected in the detection
window, this display will be blank.
Figure 19
©2023 Johnson Level & Tool