MTD 020 Serie Manual Del Operador página 6

IMPORTANT
This unit is shipped
without gasoline or
oil in the engine. Be
certain to service
engine with gasoline
and oil as instructed
in the separate engine
manual before operat-
ing your machine.
NOTE: All references
in this manual to the
left or right side of
the chipper shredder
vacuum isfrom the
operating position only.
Exceptions,if any, will
i be specified.
f
Wing NutJ
Rope Guide
,_j Upper Handle
J_
\
_X, HandleKnobs
Carriage
Bolts
Lower Handle
/_ Carriage
Wing Nuts Screws
4F--_ Bag tBIower Chute
SafetyGlasses Bottleof Engine Oil
_'_ _ _ Operator's Manual
1-If Equipped Ih_ll
Figure3-1
IMPORTANT: T his unit is shippedwithoutgasolineor oil
in theengine.Be certainto serviceenginewith gasoline
and oil as instructedin the separateengine manual
beforeoperatingyour machine.
NOTE:All referencesin this manualto the left or right
sideof thechippershreddervacuumis from the operat-
ing positiononly. Exceptions,if any,will be specified.
REMOVING UNIT FROM CARTON
1. Lift unitfrom the rearto detach it from underlying
carton materialand roll unitout of carton.
2. Checkcartonthoroughlyfor anyother looseparts.
NOTE:Makesure notto crimp cableswhile removing
looseparts or the entireunit fromthe carton.
OPENING CARTON
1. Cut eachcornerof the cartonverticallyfrom top to
bottom.
2. Removeall looseparts.
3. Removeloosepackingmaterial.
LOOSE PARTS IN CARTON
(See Figure 3-1)
• Upperand LowerHandle
• Bag
• BlowerChute (Optional)
• SafetyGlasses
• EngineOil (May be locatedin bag)
• Operator'sManual
6