OPERATION
Settings
Your appliance has the following set-
tings:
Temperature level/blower level
– 0: Off
– 1: Gentle air flow and moderate
temperature for gently drying and
styling
– 2: Strong air current, high tempera-
ture for quick drying
Cool shot
G
–
: Interrupts heating and provides a
d
cool air flow
Changing the styling attachments
Detach
the
1
attachment
A
catch
and turning the hot air brush
B
slightly to the right.
Place another styling attachment on
2
so that the recess and the catch
in line and turn slightly to the left until
it clicks.
Operation
Check if the mains voltage on the type
plate (on the handle of the device) cor-
responds to your local mains supply.
Thoroughly towel dry your hair after
1
washing.
___________________________________________________________
C
attached
styling
by pressing on the
B
Plug the
2
socket.
Turn on the appliance with the switch
3
and set the required temperature
C
level/blower level.
If necessary, interrupt heating by
4
pressing and holding down the
button (Cool Shot).
Cool Shot interrupts heating and
•
provides a cool air flow. This allows
you to fix your hairstyle better and
more lastingly.
After
5
appliance
and pull the plug of the mains
cable
D
Never wind the mains cable
•
around
cause this can cause damage.
Please check the appliance and the
cable regularly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
are
Never submerge the appliance in wa-
ter.
Use a soft, dry cloth to clean the hous-
ing. Clean the air inlet grille
sionally with a soft brush to remove
hairs and dust.
power cord into the wall
D
use,
switch
with
the
out of the socket.
the
appliance,
ENGLISH
G
off
the
switch
C
be-
occa-
E
19