Garant ST2 Manual De Uso página 72

GARANT Roughness measuring device ST2
de
Information
bg
da
en
fi
Operating hours
fr
it
Calibration operations
Software
hr
Licenses
lt
Service
nl
Reset to default settings
no
8. Evaluation and remote control
8.1. DISPLAY CUSTOMER-SPECIFIC LOGO IN THE RECORD
pl A customer-specific logo, a 3-line record header and 5 lines of profile information can be displayed in the header of the
measurement record.
i
Logo specifications: File format: *.svg, *.png, *.jpg, *.bmp or *.gif. Optimal size (W x H): 135 x 80 pixels. When printing
pt
with a Bluetooth printer, the logo must be saved as a black-and-white file.
1. Connect the micro USB cable to the roughness measuring device ST2.
ro
2. Connect the USB-A cable to the computer.
» The roughness measuring device ST2 is detected as a new drive and displayed.
3. Open the "usersettings" folder.
sv
4. Save the image file in the folder.
5. Open "usersettings.ini" with a text editor.
» The INI file opens with the "ProtocolHeader" section:
sk
[ProtocolHeader]
LOGO_NAME=
TITLE_1=
TITLE_2=
sl
TITLE_3=
1ST_TEXT=
2ND_TEXT=
es
3RD_TEXT=
4TH_TEXT=
COMMENT_0=
cs
6. Enter the name of the image file after the "LOGO_NAME=" key. Example: LOGO_NAME=MyLogo.png.
hu
72
Save
Battery
Probe pos.
Measurements
Charge cycles
Standard mode
Economy mode
Saves the information as "ma-
chineinfo.pdf".
The compressed file "marlog.tar.gz" is
also created, which should be sent to
Hoffmann Service if a fault occurs.
Shows the battery capacity in %.
Shows the current probe position ("-.- -
μm" when screen is dimmed).
Shows the number of measurements
performed.
Shows the number of charge cycles per-
formed.
Shows the normal operating duration
(in hours).
Shows the operating duration in sleep
mode (in hours).
Shows the last three calibration opera-
tions (date, calculated correction value).
Shows the current software version of
the roughness measuring device ST2.
Shows the Hoffmann license agreement
and the list of the OSS packages used in
the roughness measuring device ST2
and their licenses.
Service menu (only accessible for Hoff-
mann service technicians).
Resets the device to the default settings.