c
F
Y
M
aring
or
our
ixer
c
Y
M
leaning
our
ixer
To clean the mixer, turn off and unplug from outlet, wipe the mixer
head, stand and turntable with a damp cloth, then dry. DO NOT
IMMERSE THE STAND MIXER IN WATER. Avoid the use of
abrasive cleaners, as they may damage the finish of the mixer. Wash the
beaters and bowls in hot, soapy water after each use. Rinse thoroughly
and dry. Beaters and bowls may also be washed in an automatic
dishwasher.
s
Y
M
toring
our
ixer
Store the mixer in a dry location, such as on a countertop or table top, or
in a closet or cupboard. Insert the beaters into the proper sockets. Place
the dough hooks and other attachments in the mixing bowl. Store the
bowl(s) on the turntable. Wind the electric cord into a coil, then secure it
with a twist fastener.
M
aintenance
The motor of your stand mixer has been carefully lubricated at the
factory and does not require any additional lubricant. Other than
the recommended cleaning, no further user maintenance should be
necessary.
For servicing or repairs please contact Consumer Services for assistance.
(1-800-334-0759 in the U.S. or 1-800-667-8623 in Canada)
English-10