Publicidad
26
UNATTENDED RECORDING
following items.
1. Is the tape-run direction set correctly?
—
2. Is the reverse mode set correctly?
Operation
1. Connect a timer with a power ON/OFF facility to the
cassette deck.
Now set the recording level.
Set the TIMER switch to REC.
. Set the operation time of the timer, and'also the time
at which the timer is to be set off.
Preparations are now complete.
5. Recording
will start at the time specified
on
the
timer.
@
When current is turned on in one of the unattended
recordings, the reproduction is carried out from the
direction of the tape which is set.
WAKE-UP PLAYBACK
This allows playback to start automatically when
the
connected timer is actuated at the specified time and
power is supplied to the cassette deck.
RON
Operation
1. Connect the timer.
2. Set the TIMER switch to PLAY.
3. Set the operation time of the timer. Preparations are
now complete.
4. Playback
will start
at the
time
specified
on
the
timer.
e@
If the TIMER
switch is set to REC, the deck will be
set to the recording mode as soon as power is sup-
plied. Always
keep this switch at OFF
unless
for
unattended recording.
die folgenden Punkt iberprifen.
Bedienung
2. Danach den Aufnahmepege! einstellen.
Bedienung
1. Die Zeitschaltuhr anschlieBen.
Publicidad
