RS Pro RS-72H Manual De Instrucciones página 3

Hot wire anemometer / English
4.Operation Description
• Short press the ON/OFF Button to boot, long press
the ON/OFF Button to Shutdown.
• When you want to measure slide the sensor slide
down to the end.
• Open smart device app, wait a few seconds, and the
device will automatically connect APP.
• After the connection, the mobile device interface
is as follows, with the name of the device and the
current measurement value under the list.
• When the APP of the smart device is turned off, the
probe automatically shuts down after 3 minutes.
• Open the drop-down list of the device name and click
the device name to display the device information,
with the device name, the serial number, the battery
power, the sampling rate.
Meterbox Probes APP:
You can easily view the measurements via a APP "Meterbox
Probes"(IOS/Android App) installed on the terminal. All
measurements can be displayed as a chart or table and can be
recorded directly as a PDF or Excel file and sent via E-mail.
2
The app is available for download in the Google Play Store as well as in Apple's app
store and via the following link:
5.Specification
Function Range Resolution Accuracy
Wind Speed 0.00 to 30.00m/s 0.01m/s
-20 to 60°C
Temperature 0.1°C/°F
(-4 to 140°F)
Humidity 0 to 100%RH 0.1%RH
6.Auto Power Off
When the device is disconnected from the mobile device, the indicator light is yellow,
and after 3 minutes there is no button action, The device will turn off.
7.WARNING
• The wind speed sensor is extremely fine, when not measuring, the sensor slide should
be closed in time to protect the sensor.
• The smart device APP indicates that the meter is low on battery and should replace
the meter battery immediately.
Hot wire anemometer / English
±0.1m/s ±5% (0 to 5m/s)
±0.3m/s ±5% (5 to 30m/s)
±0.8°C (-20 to 0°C)
±0.5°C (0 to 60°C)
±3.5%RH at 20 to 80%RH;
±5%RH at 0 to 20%RH & 80 to 100%RH
3