Publicidad
Idiomas disponibles
Idiomas disponibles
4 Q@ To continue erasing tracks, repeat
steps 2 and 3.
To finish erasing tracks, press the
PGM/EDIT button for more than two
seconds.
Inserting Tracks into a
Program
1 Press the PGM/EDIT button for more
than two seconds.
The system will enter the program edit
mode.
>
ENTER
Program1
EH
5
j
>
ig
Configuration
PGM EDT — OC
TRACK
AAA
Indicator
If you wish to insert tracks into Program2,
prompt the Program2 Configuration
Indicator by pressing the PGM/EDIT
button quickly.
2 Press the a ;
to designate to which
track slot number you wish to insert a
track.
CS 3 P
3 Play the track you wish to insert.
The track slot
number
4 Press the ENTER/DELETE button once,
quickly to enter the track.
P! +ENTER+
y
l
ENTER
Gg eon
The newly entered track will fill the 6 track
slot, and tracks 7 and up will move down
one slot.
Note
Once all 12 slots have been filled, "**FULL**" will appear
on the display and it will not be possible to insert more
tracks.
5 O To continue inserting tracks into the
program, repeat steps 2 through 4.
To finish inserting tracks, press the
PGM/EDIT button for more than two
seconds.
Erasing a Program
Completely
For example, delete Program1.
1 Press the PGM/EDIT for more than two
seconds.
The system will enter the program edit mode.
Edi
G
PGA EDIT
Desc
ENTER
Program1
To delete Program2, press the PGM/EDIT
button once, quickly.
2 Press the E to get following indication.
DEL
POM
poe
PGM EDIT
If no track is stored into PGM1, this
indication will not appear.
3 Press the ENTER/DELETE button for more
than two seconds, program 1 will be
deleted.
Pi NU
GATA
One second after "NO DATA" appeared on
the display, the program edit mode for
PROGRAM 1 will be displayed.
The function of the buttons changes cyclically as
follows:
Program 1 group
E
nm Ey
U
"n
=
- - - -
-
1)
uy
nu
门
¿03
¿
Y
pu
l
|
"n
Ca az
Br
i
Press the PGM/EDIT button when any of above
indications is displayed; the display will change to
PROGRAM 2.
continue to next page 一
uonpung
Howay
wesbosg
H
11
Publicidad
