Publicidad
Idiomas disponibles
Idiomas disponibles
TAPE PLAYBACK
SOUNDADJUSTMENTS
Before turning the ignition off
Be sure to eject any cassette from the unit before
21
MUTE
turning the ignition off. Otherwise, the unit maybe
damaged when you detach the front panel.
Switching
modes
When the unit is in Radio mode, inserting
a
cassette switches the unit to Tape Play mode
automatically.
To prevent tape problems
1
Before inserting a cassette into the unit, make
sure that there is no slack in the tape. If necessary,
take up the slack by inserting a pencil into the
spindle hole and winding.
90-minute or longer tapes are extremely thin and
easily deformed
or damaged.
They are no
recommended.
2
Press SEL to select the mode that you
wish to adjust from: VOL (volume),
BAS
(bass), TRE (treble),
BAL (balance)
and
FAD (fader).
The following
indications
appear
in cyclic
order.
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication
returns to the current source
mode.
Press +/-
to adjust the level.
Press and hold either button to change the
level rapidly.
Adjust
each mode referring
to the audio
control indicators in the display window (see
page 3).
*
Decreases the
F h' i'
le'Jel of the front
speakers
+
Increases the
volume level
Increases the
bass level
Increases the
treble level
Decreases the
level of the left
speaker(s)
Decreases the
level of the rear
s~eakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/-.
MUTE button
Press this button to temporarily Iowerthevolume.
Press it again to restore the previous volume.
i I
ENGLISH
Publicidad
