Publicidad
Idiomas disponibles
Idiomas disponibles
6. Select the desired preset. Depending on your selection, the cooking temperature and time
will automatically be set to the default values.
7. To change the preset cooking temperature, press the Temperature +/- button.
8. To change the preset cooking time, press the Time +/- button.
9. Once both baskets have been set, press the start button
10. Presets with shake and turn reminders will beep 3 times halfway through the cooking
time, to notify you when to shake or turn your food.
11. Once the cooking cycle is complete, pull the basket(s) using the easy grip handle to
check on doneness. If you desire a crispier finish, simply slide the air fry basket back into
the unit and cook for a few extra minutes.
12. To add additional time, press the air fry preset
the desired time.
SYNC FINISH
Sync Finish can be used to cook two foods two ways, and have them done at the same time
by programming each basket.
1. Place food in the baskets.
2. Press the
3. To program basket 1, press
Adjust time, and temperature if necessary.
4. To program basket 2, press
Adjust time, and temperature if necessary.
5. Press the Start button
6. At the middle of the set cooking time, the unit will beep 3 times to remind you to turn or
shake your food if desired.
DUAL COOK
Dual Cook can be used to cook two foods in two baskets in the same way.
1. Place food in the baskets
2. Press the
3. Press
or
then select the desired preset; set the time and temperature if necessary.
4. Press the Start button
5. The second basket will automatically mirror the one that has been set.
6. If using a preset with shake or turn reminder, the unit will beep 3 times halfway through
the cooking timer to remind you to turn or shake your food if needed.
CLEANING YOUR DUAL AIR FRYER
Clean the air fryer after each use. Air Fry Racks and Air Fry Baskets are coated with a PTFE free
Diamond Shield
non stick coating for enhanced durability and easy clean up. Do not use metal
TM
kitchen utensils or abrasive cleaning materials to clean them, as this may damage the coating.
1. Unplug the unit from the wall outlet
2. Let the unit cool down.
3. Wipe the outside of the appliance with a damp cloth.
button. The button will flash.
then select the desired preset.
then select the desired preset.
to begin cooking.
button. The button will flash.
to begin cooking.
English - 7
.
, then press the Time +/- button to set
Publicidad
