Descargar Imprimir esta página

iRobot Roomba j6+ Guia Del Usuario página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
• Your robot will tell you something is wrong by playing an audio alert
and turning the light ring indicator red. Press the clean button or
tap the bumper for details. Check the iRobot Home App for further
support.
Red Light Ring
Low battery. Please charge.
• After 90 minutes of inactivity off the charging station, the robot will
automatically end its cleaning job.
• To factory reset your robot, remove the Dust Bin and hold down the
clean button for seven (7) seconds. A sound will let you know when the
factory reset has been completed. Press down the clean button once
more to confirm.
Battery safety & shipping
For best results, only use the Lithium Ion Battery that comes
with your robot.
WARNING
: Lithium ion batteries and products that contain lithium ion
batteries are subject to stringent transportation regulations. If you need to
ship this product for service, travel or any other reason, you MUST follow the
shipping instructions below.
• Battery MUST be turned off before shipping.
• Turn off the battery by removing the robot from the charging station and
holding down the clean button for 3 seconds with one wheel off the ground.
All indicators will turn off.
• Package the robot securely for shipping.
• If you need further assistance, contact our Customer Care team or visit
global.irobot.com.
About your Automatic Dirt Disposal
While cleaning, your robot will automatically return to the dirt disposal
to empty its bin and recharge as needed.
The dirt disposal's LED indicator will turn solid red when a new bag is
needed. If a clog is detected, the dirt disposal will trigger additional
attempts to automatically clear the clog.
Note:
If you place your robot on the dirt disposal by hand, it will not empty
automatically. In this case, use the iRobot Home App or hold the button
down for 2-5 seconds.
Roomba
j6+ Owner's Guide
5
®
EN

Publicidad

loading

Este manual también es adecuado para:

Rve-y1Adg-n1