iRobot Roomba j6+ Guia Del Usuario página 13

Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to remove it
from the robot.
EN
2
Pull firmly on the wheel to remove it from its
housing (see illustration below).
3
Remove any debris from inside the wheel cavity.
4
Reinstall all parts when finished. Make sure the
wheel clicks back into place.
Important: A front wheel clogged with hair and
debris could result in damage to your floor. If the
wheel is not spinning freely after you have cleaned
it, please contact Customer Care.
8 For more information, visit global.irobot.com
Axle Wheel
Housing
Cleaning the Multi-Surface Brushes
1
Pinch the brush-
frame release tab, lift
the tab and remove
any obstructions.
2
Remove the brushes from the robot. Remove
the brush caps from the ends of the brushes.
Remove any hair or debris that has collected
beneath the caps. Reinstall the brush caps.
3
Remove any hair or debris from the square and
hexagonal pegs on the opposite side of the
brushes.
4
Reinstall the brushes in the robot. Match the
shape of the brush pegs with the shape of the
brush icons in the cleaning head module.
Removing Debris from
Blower Cover
Inspect blower cover for any lint
or debris build-up, and wipe
with a clean dry cloth to remove.