Publicidad
Idiomas disponibles
Idiomas disponibles
Putting into operation
Setting the temperature
The temperature depends on certain factors, such as the place of installation, how often
the appliance door is opened and closed or how the appliance is
loaded.
1. Adjust the internal temperature of the appliance with the rotary
knob.
2. When switching on for the first time, turn the temperature
regulator to the highest (coldest) setting.
→ The appliance reaches its normal working temperature after approx. 2 hour and is
then ready for operation.
3. Turn the temperature regulator back to a medium setting.
Locating the coldest position in the refrigerator compartment
The adjacent symbol indicates a temperature of at least 4 °C and colder in the
refrigerator compartment (above the glass shelf over the vegetable drawer) approx. 8
cm from the rear wall
•
If "OK" does not appear, the average
temperature in this area is set too warm.
•
Set the temperature regulator to a colder
setting. Only change the temperature
regulator gradually and wait for
approximately 12 hours before checking
again.
•
If the sticker indicates "OK", it means that
the temperature regulator is set correctly
and the temperature in the appliance is
correct.
➢ To keep the temperature within this range, do not adjust the
➢ In refrigerating appliances with integrated fan function or NoForst
➢ The "OK" sticker is intended for use in this appliance only.
➢ If the display remains white, the temperature is too high.
➢ After loading the appliance and opening the appliance door, the
Page | 36
position of the temperature regulator.
models, the sticker is not attached because the temperature
inside these appliances is uniform.
Increase the temperature regulator by one position and wait
about 12 hours.
display may change for a few seconds.
Publicidad
