Main Components; Operation And Use - SOLAC HU1060 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Libro HU1060.book Page 11 Monday, November 10, 2008 10:17 AM
• Do not use the appliance if the water tank is empty.
• Do not expose to direct sunlight or place near heat sources.
• Ensure that the water tank cover is completely closed.
• Ensure that the appliance is unplugged before removing the water tank.
• Do not touch the ultrasound transmitter with your hands or with tools.
• Do not use the humidifier when barefoot. Do not touch the appliance with
wet hands when in operation.
• When unplugging the appliance, do not pull on the power cord or the
appliance.
• Never leave the appliance outdoors exposed to the elements.
• The appliance and its power cable must not be placed under water in any
case.
• Do not fill it with hot water.
b
WARNING!!: When you want to dispose of the appliance, NEVER
throw it in the bin. Take it to your nearest RECYCLING POINT or
waste collection centre for treatment. You will thus be helping to take
care of the environment.

2 MAIN COMPONENTS

1
On/off switch
2
Water tank
3
Tank cover
4
Tank handle
5
Steam outlet
6
Base
7
Ion exchange resins
8
Transducer
9
Steam flow regulator
10 Anti-bacteria filter
11 Interior water tank
12 Empty tank indicator light
13 "On" indicator light

3 OPERATION AND USE

1 Remove the water tank (2) from the base (6), turn it over, and remove
the cover from the bottom part (3) by turning it counter-clockwise. Fig.1.
Add cold tap water without filling it completely, otherwise the ion
MAIN COMPONENTS
en
11

Publicidad

Tabla de contenido
loading

Tabla de contenido