Publicidad
ENG
Product review
1. Detachable upper body
2. Air outlet
3. Light indicators
4. Main body
5. Control switches
6. Air inlet
7. Base
Note: All images in this manual are for clarification purposes.
Discrepancies between the real object and the picture on the
drawing can occur.
4
Assembly
Assembly of base
1. Remove all parts from packing.
2. Turn the main body upside down and remove the base nut on
the bottom adaptor of the
main body.
3. Pull the power cord through the center hole of the base.
Attach the base to the main body
by fastening the base nut.
4. Position the power into its routing slot on the base.
5. Turn the main body right side up and place on a dry and level
surface.
Assembly of upper body
Align 6 pegs on the upper body with 6 pegs holes on the main
body and push the upper body toward the control panel until
they are joined together tightly. (see Fig. 1).
1. Pegs
2. Pegs holes
1.
1.
CONTROL PANEL
1. Swing
2. Timer
3. Mode
4. Speed
5. On/Off
Publicidad
