Publicidad
Idiomas disponibles
Idiomas disponibles
12
www.aeg.com
4.10 High temperature alarm
When the temperature in the freezer
compartment increases (for example due
to an earlier power failure), the alarm
indicator flashes, the freezer temperature
indicator shows H° and blinks and the
sound is on.
To deactivate the alarm, press any
button.
The alarm indicator and sound go off.
The freezer temperature indicator shows
H° for 5 seconds before indicating the
freezer temperature again.
The alarm restarts one hour
after deactivation until the
normal conditions are
restored.
If you do not press any
button, the sound switches
off automatically after
around one hour to avoid
disturbing.
4.11 Door open alarm
If the fridge door is left open for
approximately 5 minutes or if the freezer
door is left open for approximately 80
seconds, the sound is on and the door
open alarm indicator turns on. The
internal fridge light may also start
flashing.
The alarm stops after closing the door.
Press any button to switch off the sound.
If you do not press any
button, the sound switches
off automatically after
around one hour to avoid
disturbing.
4.12 Air filter change
indicator
When the air filter has expired and
requires replacement, the Air filter
change indicator and the Filter Reset
alarm indicator turn on.
Refer to "Installing and replacing the
CleanAir+ filter" section in "Care and
cleaning" chapter for the replacement
instructions.
After the filter replacement, press the
Filter Reset alarm button to turn off the
alarm.
4.13 Wi-Fi connectivity setup
This functionality allows you to connect
your appliance to Wi-Fi network and to
link it to your mobile device. With this
functionality you can receive
notifications, control and monitor your
appliance from your mobile device.
To connect the appliance you need:
• Wireless network with the Internet
connection,
• Mobile device connected to your
wireless network.
Frequency/Proto‐
col
Power
Encryption
Installing the mobile application
Take the following steps to connect the
appliance to Wi-Fi:
1. Make sure that the appliance is
plugged into a power socket and
turned on.
2. Make sure that your mobile device is
connected to the same wireless
network you want to add your
appliance to.
3. Download the dedicated application
on your mobile device from Google
Play (Android) or App Store (iOS)
and install the application on your
mobile device.
4. Open the app and register to create
an account.
Configuring the appliance wireless
connection
Follow the instructions in the app to
complete the onboarding process:
1. Press and hold the Connectivity
button on your appliance for 3
seconds until you hear a beep. This
will start the Wi-Fi system.
Wi-Fi: 2.4 GHz /
802.11 bgn
Wi-Fi 2.4 GHz: <20
dBm
WPA-PSK, WPA2-
PSK, WPA3-Per‐
sonal
Publicidad
