Ecler Sclat 200VS Manual De Instrucciones página 12

XFA (19), XFB (20) Crossfader assignment buttons
The MASTER module of the SCLAT 200vs features a horizontally positioned fader. This
device - called STUDIO VCA XF - lets you make a transition between any channel signals in a very
easy way.
The two push-buttons found below the CUT button let you assign the current channel either to
the A Crossfader channel (XFA) or to the B Crossfader channel (XFB). A visual indication shows if
the current module is assigned to channel A or B of the crossfader. If a module is not assigned to any
crossfader channel, the signal will be sent directly to the main mix bus. if both push-buttons are
depressed, the module will be assigned to XFA
PEAK (14) and SP (15) Indicators
The PEAK indicator lights up when signal clipping is imminent. The signal is not yet clipped
but the real clipping threshold (saturation) is almost reached. The PEAK indication may sporadically
light up to the rhythm of the music (bass frequencies) or during a "shout". It should under any
circumstances keep lit permanently. The peak indicator activates at +10dB above the nominal input
level.
The SP (Signal Present) indicator directly monitors the input signal before the GAIN control.
Its threshold is set at -40dB. This indication is an excellent quick reference for verifying that the signal
source is actually working.
Channel FADER (16)
The SCLAT 200vs only employs high quality professional faders.
12