Descargar Imprimir esta página

GE AWCS08 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instructions
1. WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to modify
them for other types of windows.
• The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of
the power cord.
• Follow the dimensions in the table and
illustration for your model.
Models
AWCS08
AWCS10 / AWCS12
AWCS14
(With side curtain panels)
2. STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly. To adjust for this,
attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2"
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place
a piece of wood on the sill to make it 1/2" higher
than the top of the storm window frame or the
vinyl frame.
Attach securely with nails or screws provided by
the installer.
1/2" higher
than storm
window
frame
Storm window
frame
10
A
B
13 3/8" min
24 1/2"-36"
14 9/16" min
25" - 36 5/8"
15 5/8"
26 1/8" - 37 3/4"
A
B
1/2" higher
than vinyl frame
(on some windows)
Wood
Sill
Vinyl frame
3. PREPARE THE AIR CONDITIONER
A. Install the top mounting rail with 4 Type A
screws (AWCS10/AWCS12/AWCS14) or 3 Type
A screws (AWCS08) from the outside of the
case.
Top Mounting rail
B. Apply the weather seals provided to the bottom,
top and sides of the window to the seal around
the perimeter of the air conditioner.
Cut and apply
weather strip
to front edge of
window frame.
Cut and apply
weather strip to
back edge of
the window sill.
C. Slide the side curtain panels into the side panel
rails.
D. Slide left and right side curtain frames into top
and bottom rails. Make sure that side curtains
of
Bottom
mounting
rail
Cut and apply
a weather strip
to side of the
curtain frame
(one on each
side).
snap into side
the frames.
Snap curtain
into frame
49-5000858 Rev. 0

Publicidad

loading

Este manual también es adecuado para:

Awcs10Awcs12Awcs14