Phone Settings; Language Setup; Setting The Lcd Contrast; Setting Date And Time - Daewoo DTC-410 Manual De Instrucciones

3. Press the MENU button, then press UP/CID or DOWN/OUT button to find Call?,
4. Press the MENU button to confirm, the telephone will dial out the number automatically.
Or else, when reviewing the calls, pick up handset or press
Note: If the PABX code is set, the telephone will be detected and add the code before the number when
calling back the incoming number (at least 6 digits). It will dial the PABX code first and then dial the number.
DELETE THE CALLS
Reviewing the call log it is possible to delete a contact, following the procedure below:
3. Select the contact to be deleted navigating with UP/CID or DOWN/OUT keys.
4. Press the MENU key, then press UP/CID or DOWN/OUT button to find Delete? , press the MENU button
to confirm, the number will be deleted.
If you select Delete all?, all the records will be deleted.

PHONE SETTINGS

The telephone offers several base options, it is possible to access them by pressing MENU key, browse the
menu with UP/CID or DOWN/OUT keys until the display will show Phone setting.

LANGUAGE SETUP

The telephone supports 6 kinds of languages, select for you preferable style.
To modify the phone language, please follow the procedure below:
1. When the phone shows Phone setting, press MENU key, LCD displays Set language and press MENU key
again, the display shows English.
2. Press UP/CID or DOWN/OUT keys to choose French/Spanish/German/Italian/Polish/English
3. Press MENU key to confirm

SETTING THE LCD CONTRAST

When the phone shows Phone setting, press MENU, and navigate with UP/CID or DOWN/OUT button until
the display shows LCD contrast.
The LCD default contrast level is 1 (5 levels can be chosen).
To modify the contrast value:
1. When the LCD displays LCD contrast, press MENU key.
2. Press UP/CID or DOWN/OUT to choose the desired contrast level.
3. Press MENU key to confirm

SETTING DATE AND TIME

When the phone shows Phone setting, press MENU, navigate with UP/CID or DOWN/OUT button until the
display shows Set Date/Time.
Press MENU key to confirm, there are four sub-menus:

Time format

Date format

Set time

Set date
Press UP/CID or DOWN/OUT key to choose Time format, press MENU key to enter, use UP/CID or
5.
DOWN/OUT key to choose between 24 hours (default) and 12 hours, then press MENU key to conform.
Press UP/CID or DOWN/OUT key to choose Date format, press MENU key to enter, use UP/CID or
6.
DOWN/OUT key to choose between MM/DD and DD/MM, then press MENU key to conform.
Press UP/CID or DOWN/OUT key to choose Set time, press MENU key to enter, use UP/CID or
7.
DOWN/OUT key set time (hour, minute), then press MENU key to conform.
DTC-410
key to dial out the number displayed on LCD.
20