Avanti PDR75L34G Manual De Instrucciones página 11

Ocultar thumbs

página de 40

/ 40
Marcadores

Idiomas disponibles

Cleaning The Appliance

•

Unplug the unit and remove contents.

•

Wash the inside with a warm water and baking soda solution. The solution should be about 2

tablespoons of baking soda to a quart of water.

•

Remove the drain plug to drain the excess liquids.

•

The outside of the unit should be cleaned with mild detergent and warm water.

CAUTION: Failure to unplug the appliance could result in electrical shock or personal injury.

Defrosting the unit

Humidity can form frost in the interior of the unit which will affect the cooling performance.

Defrost the unit regularly to avoid any possible issues.

a) Turn off the unit

b) Remove the contents

c) Open the doors and allow the frost to defrost naturally, do not use any sharp or hard objects to

remove the frost from the interior of the unit as this can damage the unit.

d) Remove the drain plug.

e) Wipe off the excess water

Replace the drain plug

You can solve many common appliance problems easily, saving you the cost of a possible service

call. Try the suggestions below to see if you can solve the problem before calling for service.

PROBLEM

Refrigerator does not operate.

Refrigerator does not cool.

Refrigerator is not cold

enough.

Error Code F1

Error Code F2

Error Code F3

Error Code F4

Error Code F5

Error Code F6

Error Code F7 or F8

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

Not plugged in.

The circuit breaker tripped or blown fuse.

The refrigerator temperature control is set at "OFF"

The room temperature is hotter than normal.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

A large amount of warm or hot food has been stored recently; wait

for the refrigerator to reach is set temperature.

Low Voltage to unit

Adjust battery protection from H to M or from M to L

Condenser Fan Overload