Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature Display ºC/ºF
To change the display setting from ºC to ºF. Power OFF the unit. Press and hold the SET button for
3 seconds or until E1 appears in the display. Press the SET button again until E5 is shown. Press
the + or – to select ºC or ºF.
Setting the Temperature Control
This appliance is designed for mobile use (RV, Motorhome, Camper or Vehicle) and outdoor use.
The following instructions will apply when the unit is connected to either DC or AC power source using
the appropriate adapter.
Your unit has only one control for regulating the temperature in the compartment.
When the unit is first plugged in, you will hear a beep and the control panel will light up. You can select
the temperatures and settings as desired.
Display:
This display will show the set temperature while programming and then the current
temperature of each zone while operating.
Temperature Setting: Press the + or – buttons to select the desired temperature of each zone, press
the "SET" button to switch between zones. (Temperature Range -4ºF – 68ºF (-20ºC – 20ºC))
Cooling Mode (ECO / MAX):
to select the desired mode: (Factory default setting is MAX).
Max:
Normal Cooling Mode
ECO:
Energy Saving Mode
OPERATING YOUR APPLIANCE
Factory default is ºF
Press the "SET" button to enter the mode selection, press "SET" again
9
Publicidad
