Meta System Meta Voice M1 Manual De Uso página 10

Adjusting the sound level
Calling numbers without a voice tag
If you need to call a number that has no voice tag stored, you can use your mobile pho-
ne's keypad to place the call. The call will then be automatically transferred to the hands
free set so you can continue your conversation in total safety.
Please Note
The implementation of mobile phone management software diff ers from manufacturer
to manufacturer and from model to model and even from production lot to production
lot on the same model. This diversity of software can lead to the behaviour of auxiliary
functions (such as: call transfer from hands free /privacy and vice versa, calling with voi-
ce tags, etc...) that does not match the descriptions in these instructions exactly. This
should not, however, compromise the possibility of making hands free calls.
CAUTION
a) Meta Voice is fi tted with a system that reduces the volume of the car radio (the MUTE
function) when a call is placed or received. This function can only be used with certain
car radios; refer to the operating instructions for the car radio for the appropriate con-
nections.
b) With certain mobile phones, the telephone connection may not be disconnected
immediately at the end of a call, leaving the car radio mute. In this case, simply press
the button on the hands free set to resume normal operation.
c) Usually, the exchange of signals between the mobile phone and the hands free sy-
stem, (known as the wireless connection), is always operational. The LED identifi es this
status when it is lit without fl ashing. Some mobile phones may not envisage a constan-
tly active link and therefore the LED will fl ash. In this case, however, the connection is
still correct and the system is ready to work.
d) An insuffi ciently charged mobile phone battery may lead to repeated disconnection
and subsequent reconnection: this is very inconvenient when using the hand free sy-
stem.
e) Some mobile phones are designed to transfer any sound produced by Bluetooth,
therefore we recommend you cancel the keypad tones to avoid activating the car radio
"mute" each time a key is pressed. It is also possible to disable the "A2DP" Bluetooth
profi le and prevent the hands-free system from reproducing these audio "packages".
In this case, not even the audio reproduced by audio and video fi les are transferred. To
enable or disable the "A2DP" Blutooth profi le, simply enter the following on the con-
nected phone:
*06*06*00* Disables the "A2DP" profi le
*06*06*01* Enables the "A2DP" profi le
Always refer to the operating manual for your mobile phone.
While you are taking a phone call, you can adjust the sound level, if
necessary, by simply pressing the + and – keys at the side of the led/
switch. The system will increase or decrease the volume each time
you press one of these. You can also adjust the volume using the te-
lephone's controls. Please refer to the telephone's operating ma-
nual for further details.
10