Meta System Meta Voice M1 Manual De Uso página 9

STANDARD ring-tone
In those cases when the telephone does not transmit its ring-tone via Bluetooth, Meta
Voice, it signals an incoming call with the STANDARD ring-tone, which can be selected
from among the three tunes of the hands-free unit or disabled.
It is also possible to set the volume of the ring-tone between "02" and "12". To select the
tune and volume of the standard ring-tone, simply couple and connect a telephone to
the Hands-free Bluetooth (refer to the chapters "Sign up" and "Connection"), compose
a sequence of numbers on the keypad of the device and make the call. The confi gura-
tions are described in the table below:
SELECTABLE
PARAMETER
Tune disabled
Tune 1
Tune 2
Tune 3
Parameters
0 to 12
In response to the entry of each type of parameter, Meta Voice emits tones to confi rm,
or not, correct execution of the command:
• A SHORT TONE confi rms confi guration.
• A LONG TONE means the parameter has not been sent correctly.
• A DOUBLE TONE confi rms the parameter sent is already present.
Rejecting a call
You can reject an incoming call by briefl y pressing the button twice.
Last number redial
Redial by briefl y pressing the button twice.
Privacy mode
During a call, press and hold the button down to disable the hands free set and the call
will be transferred to the telephone. You can return to hands free mode by holding the
button down again.
Table of available commands using the button/led
Answer call
Reject call
(with ring on hands free)
End call
Redial last number
Voice call
Call waiting
(with call in progress)
Transfer
(privacy/hands free and vice versa)
COMMAND
TO BE SENT
*06*03*00* Permits selection of the tune of the standard ring-to-
*06*03*01* ne, transmitted when the telephone does not enable
*06*03*02* sounding of your own ring-tone on the loudspeaker
*06*03*03* via Bluetooth.
It is possible to set the volume of the standard ring-
*06*04*??* tone.
Replace "??" with a number between 02 and 12.
Press briefl y (< 1 s.)
Press briefl y twice
(two presses in max time of 2 s.)
Press briefl y (< 1 s.)
Press briefl y twice (two presses in max time of 2 s.)
Press and hold (> 3 s.)
Press briefl y twice
(two presses in max time of 2 s.)
Press and hold (> 3 s.)
NOTES
9