Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
OPERATION OF YOUR FAN
Take out the fan from the packing carton. Turn the fan upright and it is now ready for
use.
USING YOUR FAN
• Turn speed control to choose from three speeds 1 (low), 2 (medium), 3 (high)
• When finished, turn speed control to Off
ADJUSTABLE PIVOTS
For optimal air circulation, your fan can be adjusted to various different angles to
direct airflow.
To adjust the fan up to a 90 degree tilt position, pull the front grill back and
downward. You will hear clicks while adjusting the tilt.
Page 6
90
˚
SET UP & USE
REPLACING THE FUSE
• Disconnect fan from power outlet by grabbing the plug at the end of the cord. Do
not unplug by pulling the cord itself
• Open fuse cover located in the side of the power cord plug by sliding it toward the
plug blades
• Remove fuse carefully by taking a small tool and slowly prying out one end. Once
you have one end out, slowly pry out the other end.
• To avoid the risk of fire, replace only with similar 2.5 Amp, 125V fuse.
• Close fuse cover by sliding cover toward the top of the plug.
CAUTION: Do not attempt to replace the plug itself. Discard the product entirely if
the plug itself is damaged.
Fuse
Fuse cover
CLEANING AND MAINTENANCE
WARNING: Be sure to unplug from the electrical supply source before cleaning.
Be sure not to get water or any other liquid inside the motor.
Do not disassemble the fan for cleaning.
• Plastic parts of the fan should be cleaned with mild soap and a damp cloth or
sponge. Rinse with clean water to remove any soapy film residue.
Page 7
Publicidad
