6.2 REGULAR MAINTENANCE
Weekly
Monthly
Every 3 months
Every 6 months
MOBIL OIL
ESSO NUTO
MOBIL OIL
ESSO NUTO
TIGHTENING TORQUES FOR SCREWS AND NUTS WITH PG METRIC THREAD
M6
M8
10 Nm
25 Nm
1 Kg
2.5 Kg
M22
M24
559 Nm
711 Nm
57 Kg
72 Kg
Check safety devices every week, as indicated in this manual.
Check that the ball bearings on the column ends (2, Fig.18) are greased correctly, and add regular gre-
ase if necessary.
Clean the lift, taking particular care to remove any foreign objects which may compromise the functio-
nality of the mechanical and electric safety devices.
WARNING
Never use compressed air, pressurised water or aggressive chemical products to clean or remove re-
sidue from the machine.
Check that the anchor bolts fastening the machine to the ground are tightened to the correct torque, and
tighten if necessary with a torque wrench (see tightening torque table)
Check that all fastener screws and nuts are tightened to the correct torque, and tighten if necessary with
a torque wrench (see tightening torque table)
Grease the sliding shoes of the trolley with TEXACO MULTIFAK EP2 grease or an equivalent product
Grease the lead screws and split nuts with multifunctional lithium grease for general lubrication
Check that the tension of the chain is correct (if applicable)
Check all structural and mechanical components for faults or other problems
TABLE OF FLUIDS FOR HYDRAULIC SYSTEM
BRAND
API
SHELL
BP
AGIP
FINA
LUBRICANT GREASE TABLE
BRAND
API
SHELL
BP
AGIP
FINA
M10
M12
50 Nm
87 Nm
5.1 Kg
8.9 Kg
M27
M30
1049 Nm
1422 Nm
107 Kg
145 Kg
HYDRAULIC CONTROLS
CIS 32
DTE24
TELLUS 32
NUTO HP 32
ENERGOL HLP65
OSO 35
HYDRAN 31
HYDRAULIC CONTROLS
PIGREASE LT-S
MOBILPLEX 46
ALVANIA EP 1
BEACON EP 1
ENERGREASE LS 1 EP
GR.MU EP 1
MARSON EPL 1
M14
M16
138 Nm
210 Nm
14.1 Kg
21.5 Kg
M18
M20
289 Nm
412 Nm
29.5 Kg
42 Kg
29