Publicidad
Idiomas disponibles
Idiomas disponibles
Handle with care to avoid burning yourself, since the nails and nose may
become very hot.
If nails are jammed in nose, remove it, and adust the Nailer in the following order.
1. Remove the fuel cell and the battery from the Nailer. (Fig. 1)
2. Lock follower back in magazine and remove fasteners. (Fig. 2)
3. Loosen the knob and lower toward the handle.
4. Pull magazine away from the nose, and clear jam. (Fig. 3)
5. Connect the fuel cell and the battery to the Nailer.
ALWAYS WEAR SAFETY GLASSES.
1
Always disconnect fuel and battery before making adjustments or before attempting any part
assembly or disassembly.
Hook can be used on either side of the tool. To remove, replace or switch belt hook side, see Fig. 1 & 3.
1. Remove the fuel cell and battery from the tool.
2. Hook is held in by a screw and a hook plate. (Fig. 2)
1
CLEARING A JAM FOR GCN40T
Fuel cell
Battery
3
2
2
INSTALLING THE BELT HOOK
3
-15-
Knob
Publicidad
