Publicidad
Idiomas disponibles
Idiomas disponibles
READ SECTION TITLED "INSTALLING FUEL CELL " SAFETY INSTRUCTIONS ON PAGE 10.
If the gas leaks from the metering valve or the gas cartridge after attaching the metering
valve, replace with new metering valve.
Do not attempt to reuse the metering valve. Replace with new metering valve.
To attach the metering valve to a fuel cell:
1. Separate the metering valve and the cap from the gas cartridge.
2. Press forward (stem side) and downward on the front side of the metering valve.
3. Press downward on the rear of the metering valve until it seals
1
PREPARING THE FUEL CELL
2
-9-
3
Publicidad
