ATOMSTACK A6 PRO Manual Del Usuario página 16

2.1.5 Set the device name and the
length of the X/Y axis.
365 305
305
365
2.2 How lightburn goes online
2.2.1 Device Settings - > "Baud Rate" setting 115200;
115.200
Using LightBurn
1. Select "File" and click "Import" to open the image for engraving.
2.1.6 Disable the auto-home function.
Auto"home" your laser on startup
2.2.2 Select "COM7", "ATOMSTACK", "Console" in sequence -> Confirm
is displayed, and the machine buzzer sounds.
ok
13
2.1.7 Click "Finish" to complete the setup.
365
Console COM7
2. Right-click on the image and select "Adjust Image" to
set the appropriate parameters.
1
305
Finish
ATOMSTACK
2