Publicidad
Idiomas disponibles
Idiomas disponibles
&
AUTO
This monitor normally will be in AUTO mode, which means it switches cameras
G
automatically.
Press this button if you want to rescan camera port. This monitor will
G
automatically skip the cameras that are not connected, and the ALARM mode is
automatically activated in AUTO mode.
*
CAMERA SELECT(C1~C4)
If you want press any camera selector button, this monitor goes into manual
G
mode. Press AUTO button if you want to return to auto mode.
(
ALARM/TIME
ALARM : Press this button if you wish to enable or disable an alarm. Initial
G
mode of monitor is alarm enable mode.
(Red LED on : Alarm enabled)
TIME
: Sequencing time(1 to 10 seconds) can be adjusted with this knob.
G
Go on pressing time button and press
Ex) if you go on pressing time button and press 1S, 2S, 3S, the
switching time of screen will be 6 second.
)
SCREEN ON/OFF
Turn the monitor screen ON/OFF. Even if the monitor is off, the system still
G
works for recording. Vertical spot line can be shown when turn off this switch.
1
POWER LED
MAIN Power LED.
G
2
SPEAKER
3
MICROPHONE
17
E
.
Publicidad
