Care and Cleaning
□
To prolong the original appearance, clean with clear water and a soft, damp cloth only.
□
Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature
deterioration of the finish. This is not a defect in the finish and will not be covered by the warranty.
□
Do not spray the light fixture with a hose or power washer.
Troubleshooting
Problem
The light will not come on.
Possible Cause
□
The light switch is turned off.
□
The bulb is loose or burned out.
□
The fuse is blown or the circuit breaker
is turned off.
□
The circuit wiring is incorrect, if this is
a new installation.
8
Solution
□
Turn the light switch on.
□
Check the bulb and replace
if burned out.
□
Replace the fuse or turn the
circuit breaker on.
□
Verify the wiring is correct.