Publicidad
Idiomas disponibles
Idiomas disponibles
5
ATTACH BOWL TO FLOOR KNOBS
NOTE: Exposed
trap shown.
Bolt caps not
used for Con-
cealed Trap
models.
Hand tighten only.
Do not over-tighten.
7
CONNECT WATER SUPPLY
Thread, then hand
tighten water
supply. This is best
done when using
Concealed Trap
Bowl.
WARNING: Over-tightening of water supply line nuts
could result in breakage and potential flooding.
If the connection leaks after hand tightening, replace the supply line. If the connection continues to leak with
the new supply line, replace the fill valve. Do not use plumber's putty, pipe dope or any other sealant on the
water supply connection. Use of plumber's putty, pipe dope, or any other type of sealant will void the warranty.
7302484-100 Rev. E (6/23)
6
ATTACH TANK TO BOWL GASKET
MANUAL
FLUSH
BUTTON
Install tank
grommets and
tank bolts in
bottom of tank
as shown.
Place the tank gasket over
thetank nut ensuring there
Tank
are no gaps between the
to Bowl
gasket and the chinaware.
Gasket
8
CONNECT TANK AND BOWL
Tighten handles
alternately until
tank contacts
bowl.
HAND TIGHTEN
ONLY!
For seat
installation,
see instructions
included with
seat.
Publicidad
