sleet
is
or
Rs
SSI
pant
i ae,
TREE
So Be.
Unpacking and Installation
Congratulations on Your Purchase!
Your new high fidelity Amplifier is designed to deliver maximum enjoyment and years of trouble free
service. Please take a few moments to read this manual thoroughly. It will explain the features and oper-
ation of your Amplifier and help insure a trouble free installation.
Please unpack your Amplifier carefully. We recommend that you save the carton and packing material.
They will be helpful should you ever need to move your unit and may be required if you ever need to
return it for service. Your Amplifier is designd to be placed in a horizontal position and it is important
to allow at least two inches of space behind your unit for adequate ventilation and cabling convenience.
To avoid early damage, never place the unit near radiators, in front of heating vents, in direct sun light,
or in excessively humid or dusty location.
Connect your complementary components as illustrated in the following section.
O7- NCR ETO]
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING
To prevent fire or shock hazard, do
not expose
the
unit to rain or
moisture.
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous
voltage'
within
the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature
accompanying the appliance.
Caution: To prevent electric shock do not use
this (polarized) plug with an extension
cord, receptacle or other outlet unless
the blades can be fully inserted to pre-
vent blade exposure.
ttention: Pour prévenir les chocs électriques ne
pas utiliser cette fiche polarisée avec
un prolongateur, une prise de courant
ou une autre sortie de courant, sauf si
les lames peuvent étre insérées 4 fond
sans
en
laisser
aucune
partie
a
découvert.