Janome Hello Kitty hk15822 Manual De Instrucciones página 20

b
z
x
c
Bobbin winding (continued)
b Depress the foot control again. When the
bobbin is fully wound, it stops
automatically. Return the bobbin winder
to its original position by moving the
spindle to the left, and cut the thread.
• Inserting bobbin
z Place a bobbin in the bobbin case, making
sure the thread feeds clockwise from the
bobbin.
x Draw the thread through the slot of the
case.
c Continue to draw the thread under the
tension spring q and through the
q
opening.
Pull out about 4˝ (10 cm) of thread.
q Tension spring
16