Publicidad
Idiomas disponibles
Idiomas disponibles
Occupation of the DIP-switches:
Setting the DMX-
DIP-switch no.
starting address:
Projector number
DMX-starting
& channels
address
Device 1 - channels 1-5
Device 2 - channels 6-10
Device 3 - channels 11-15
Device 4 - channels 16-20
Device 5 - channels 21-25
Controlling:
After having addressed all LED Spots, you may now start operating these via your lighting controller.
DMX-protocol
Channel
DMX Value Function
1
0-255
2
0-255
3
0-255
4
0-255
5
0-255
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
1
2
3
4
1
2
4
8
On
Off
Off
On
Off
On
Off
On
Off
On
Off
red
green
blue
dimmer
strobe
0.5-13 Hz
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
5
6
7
8
9
16
32
64 128 256
%
0-100
0-100
0-100
0-100
23/45
00028638.DOC, Version 2.0
Publicidad
