Stihl KG 770.0 Manual De Instrucciones página 16

English
2
1
4
► Insert the container (3) into the push sweeper
so that the recesses (4) on the container (3) fit
in the mounts (5) on the push sweeper.
► Press the handle (2) down.
► Fold the push handle (1) upward.
8 After Finishing Work
8.1 After finishing work
► Remove and empty the container.
► If the push sweeper is wet: Allow the push
sweeper to dry.
► Clean the push sweeper.
► Clean the circular brushes and sweeper drum
assembly.
9 Transporting
9.1 Transporting the push sweeper
Pushing the push sweeper
► Push the push sweeper slowly and steadily
forward.
Carrying the push sweeper
1
► Fold the push handle (1) down.
► Grip the push sweeper by the carrying handle
(2) and set it up vertically.
16
3
5
5
2
► Carry the push sweeper by the carrying han‐
dle so that the circular brushes face away from
the body.
Transporting the push sweeper in a vehicle
► If the push sweeper is to be transported to
save space:
► Remove the push handle with holder.
► Position the push sweeper in the vehicle so
that the bristles of the circular brushes are not
bent.
► Secure the push sweeper with a tension belt
between the container and the housing.
► Secure the push sweeper so that it cannot tip
over or move.
Removing the push handle with holder
1
2
2
► Position the push handle (1) at a 45° angle.
Align the arrows (4) on the housing with the
bar (3) on the holder (2).
► Pull the holder (2) apart lightly and remove.
Attaching the push handle with holder
1
1
2
3
► Pull the holder (1) lightly apart and hold.
► Insert the locking tabs (2) into the recess of
the mounts (3).
8 After Finishing Work
3
4
1
4
0458-767-9901-A