GE JVM1660CB005 Instrucciones De Instalación página 7

Installation Instructions
TOOLS YOU WILL NEED
Ruler or tape measure and
straight edge
TE)
1 and #2 Phillips screwdriver
of
Tin snips (for cutting
damper, if required)
Pencil
Carpenter square
(optional)
Scissors
(to cut template, if necessary] Electric drill with "5", 14" and 5%"
wood pieces, if needed
for top cabinet spacing
{used on recessed bottom
cabinet installations only)
Gloves
Saw (saber, ne or keyhole) Stud finder or Hammer (optional)
A git Sees
Safety goggles
Level
Duct and masking tape
MOUNTING SPACE
Hi com ee * The space between the cabinets must be
IR" . . ~
be 30" or More 30" wide and free of obstructions.
k from the Cooking ~ — ® If the space between the cabinets is greater
Surface than 30%, a Filler Panel Kit may be used to fill
30" in the gap between the microwave oven and
min. the cabinets. Your Owner's Manual contains
the kit number for your model.
Backsplash . . . . .
P * This microwave oven is for installation over
ranges up to 36" wide.
66" or More * If you are going to vent your microwave oven
from the Floor to the outside, see Hood Exhaust Section for
to the Top of
5 © 0 ® ®
exhaust duct preparation.
the Microwave
= * When installing the microwave oven beneath
K smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.