Tools You Will Need - GE JVM3160RF2SS Instrucciones De Instalación

TOOLS YOU WILL NEED

#1 and #2
Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
Installation Instructions
Pencil
Scissors (to cut
template, if necessary)
Saw (saber, hole or keyhole)
Level
Ruler or tape measure and
straight edge
Electric drill with ,
3 16 7 16
and drill bits
1 2 5 8
Stud
Hammer (optional)
finder
4
Carpenter square
(optional)
Filler blocks or scrap
wood pieces, if needed
,
for top cabinet spacing
(used on recessed
bottom cabinet
installations only)
Duct and masking
tape