Publicidad
Idiomas disponibles
Idiomas disponibles
How
to Use the
SprayTips
_hL
CAUTION!
NEVER exchange spray tips without
lockingthe safety latch on the trigger.
The quick-connect on the nozzle extension allows you to
switch between five different spray tips.The spray tips vary
the spray pattern as shown below (Figure 17).
Follow these instructions to change spray tips:
• Engagethe safety latch on the spray gun.
•Putl back the collar on the quick-connect and putl the
current spray tip off. Store the spray tips in the space
provided on the handles storage panel.
NOTE: For a more gentle rinse, select the white 40° or
green 25° spray tip.To scour the surface, select the yellow
15° or red 0 ° spray tip.To apply chemical, select the black
spray tip.
• Putl back on the collar, insert the new spray tip and
release the collar.Tug on the spray tip to make sure it is
securely in place.
• For most effective cleaning, keep the spray tip from 8 to
24 inchesaway from the cleaning surface. If you get the
spray tip too close, you may damagethe cleaning surface.
• DO NOT get closer than 6 incheswhen cleaning tires.
Cleaning
and Applying
Chemical
CAUTION!
You must attach all hoses before you
start the engine. Starting the engine without alt the hoses
connected and without the water turned ON witl damage
the pump.
IMPORTANT:
Use soaps designed specifically for
pressure washers. Household detergents could damage
the pump.
To apply detergent follow these steps:
• Review the use of the spray tips.
• Prepare the detergent solution as required by the
manufacturer.
• Hang the detergent solution on the "J"hook attached to
the accessory tray, as shown in Figure 18.
Low Pressure
Black
High Pressure
Y
White
Green
Yellow
Red
40°
25°
15 °
0°
/
10
Publicidad
