Installation
Installation
Before first use, remove the PVC film from the cooking plate and drip tray.
Place the appliance on a solid, flat, heat-resistant surface. For optimum user comfort,
the appliance must be located between 85 and 95 cm from the ground.
If this appliance must be placed in close proximity to a wall, partition, kitchen furniture,
decorative borders, etc.,they should be of non-flammable material. If not, they should
be covered by appropriate heat insulating, non-combustible material, with particular
attention paid to fire prevention regulations.
Assemble the drip tray handles as shown in the diagram below :
Switching on
Connect the plancha to the nearest power source (see technical specifications of the
appliance). Caution! When you connect the plancha, it switches on automatically.
Switching off
Turn the temperature controls to the minimum position and disconnect the appliance.
- 18 -