Publicidad
lABLE CLAMP SET CP
1. Securely tighten the clamp ®to the chosen mounting surface.
2. Align the holes in the wall mount bracket (|) on the light with the holes in the table clamp.
3. Use the screws and wrench provided to fasten the wall mount to the clamp.
4. For mounting the transformer for 220-240 Volt Models, see the Transformer Mounting instructions
below. Mount the transformer and then continue to step 5-7.
5. Locate the light's power switch. Make sure it is in the OFF ("0") position ©.
6. Plug the power supply into a grounded electrical outlet.
7. Turn the light's power switch to ON (D).
Publicidad
