Bluetooth Setup; Enter Bluetooth Mode - Kenwood KDC-BT645U Manual De Instrucciones

Function of KDC-BT645U
KDC-HD545U with KCA-BT200 (Optional Accessory)

Bluetooth Setup

[SRC] [VOL]
[ ] [ ] [ ] / [ ]
Bluetooth Setup
You can select following Bluetooth Setup items.
1

Enter Bluetooth mode

KDC-BT645U: Press the [VOL] knob.
KDC-HD545U: Press the [VOL] knob for at least
1 second.
"BT MODE" is displayed.
2
Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
"FUNCTION" is displayed.
3
Select the function item
Turn the [VOL] knob and it when the desired
item is displayed.
>
Select "SETTINGS"
>
"SETTINGS" "DETAILED SET"
Function item Selectable setting/item
"PHONE SELECT" Selects a cell-phone or Bluetooth audio player*
connection. Refer to <Selecting the Bluetooth
"AUDIO SELECT"**
Device You Wish to Connect> (page 25).
"SMS DOWNLOAD" Download a short message. Refer to
<Downloading the SMS> (page 25).
"SMS INBOX" Display the received short message. Refer to
<SMS (Short Message Service)> (page 26).
"VOICE TAG" Registers voice for voice recognition and
voice to select the Phone number category in
Phone book. Refer to <Adding a Voice Dialing
Command> (page 26) and <Setting a Voice
Command for Category> (page 27).
"DETAILED SET" Move to detailed item.
"DEVICE REGIST" Registers a Bluetooth device (pairing).
Refer to <Registering Bluetooth Device>
"S-DVC SELECT"
(page 23).
"DEVICE DELETE" Cancel registration of the Bluetooth device. Refer
to <Deleting a Registered Bluetooth Device>
(page 23).
"PIN CODE EDIT" Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
<Registering PIN Code> (page 24).
22
|
KDC-BT645U/ KDC-HD545U
[DISP]
Function item or select
> >
Function item.
"AUTO ANSWER" This function automatically answers (responds
to) a call after lapse of the preset time interval
for automatic answer.
OFF: Does not answer the phone call
automatically.
0: Automatically answers the phone call at once.
1 – 8 –99: Automatically answers the phone
"BT SP SELECT" You can specify the audio output speakers.
Select the speaker which is further from the
microphone in order to prevent howling or
echoes.
SP FRONT: Outputs audio from the front-left and
SP ALL: Outputs audio from the all speakers.
"CALL BEEP" You can output a beep from the speaker when a
call comes in.
ON: Beep is heard.
OFF: Beep is canceled
"BT F/W UPDATE" Display the firmware version and update the
firmware. Refer to <Displaying the Firmware
Version> (page 24).
"MIC GAIN"* Adjust the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to "+" increases the voice volume.
–3 – 0 – +3
"NR LEVEL"* Reduce the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to "+" increases the
noise reduction.
–3 – 0 – +3
"EC LEVEL"* Adjust the level of echo cancellation. Setting to
"+" increases the echo cancel reduction.
–2 – 0 – +2
*KDC-BT645U only
**KDC-HD545U with KCA-BT200 (Optional Accessory) only
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function Setting mode
Press the [ ] button for at least 1 second.
call after lapse of 1 – 99 seconds.
front-right speakers.