Registering Bluetooth Device (Pairing); Deleting A Registered Bluetooth Device - Kenwood KDC-BT645U Manual De Instrucciones

Registering Bluetooth Device (Pairing)

To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
Registering from this unit
1
Select Bluetooth device registration mode
For how to select setup item, refer to <Bluetooth
Setup> (page 22).
>
Select "SETTINGS"
REGIST".
2
Enter Bluetooth device registration mode
Press the [VOL] knob.
Search for the Bluetooth device.
When search is completed, "FINISHED" is displayed.
3
Select the Bluetooth device
Turn the [VOL] knob and press it when the
desired Bluetooth device name is displayed.
4
Input the PIN code
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
5
Transmit the PIN code
Press the [VOL] knob.
If "PAIRING OK" is displayed, registration is
completed. If the error message appears even
though the PIN code is correct, try Registering
Special Bluetooth device.
6
Return to the device list
Press the [VOL] knob.
7
Exit Function Setting mode
Press the [ ] button for at least 1 second.
⁄
• This unit allows up to 8 digits to be input for a PIN code.
If a PIN code cannot be input from this unit, it can be
input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot
be registered normally (pairing).
1
Select Special device registration mode
For how to select setup item, refer to <Bluetooth
Setup> (page 22).
>
Select "SETTINGS"
SELECT".
> >
"DETAILED SET" "DEVICE
Operation
Turn the [VOL] knob.
Press the [¢] button.
Press the [4] button.
>
"DETAILED SET" "S-DVC
2
Enter Special device registration mode
Press the [VOL] knob.
A list is displayed.
3
Select a device name
Turn the [VOL] knob and press it when the
desired device name is displayed.
If "COMPLETE" is displayed, registration is
completed.
4
Go through the procedure step 3 of
<Registering from this unit> and complete the
registration (pairing).
Cancelling Special device registration mode
Press the [ ] button for at least 1 second.
⁄
• If the device name is not in the list, select "OTHER
PHONE".

Deleting a Registered Bluetooth Device

You can delete a registered Bluetooth device.
1
Select Bluetooth device deletion mode
For how to select setup item, refer to <Bluetooth
Setup> (page 22).
>
Select "SETTINGS"
DELETE".
2
Enter Bluetooth device deletion mode
Press the [VOL] knob.
"(name)" is displayed.
3
Select the Bluetooth device
Turn the [VOL] knob.
4
Delete the selected Bluetooth device
Press the [VOL] knob.
"DELETE" is displayed.
5
Exit Function Setting mode
Press the [ ] button for at least 1 second.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
>
"DETAILED SET" "DEVICE
English
23
|