Waterproof Housing
Up Button
USB
Down Button
HD out
WARNING: Please lock the waterproof housing before putting it into water,
otherwise it can result in leaks that may damage or destroy your camera.
Water will damage both the camera and the battery, which could cause an
explosion or fire. Your warranty does not cover water damage resulting from
user error.
POWERING ON + OFF
To Power On:
Press and hold the Power/Mode Button for 3 seconds. The camera beeps while the camera
Working Indicator is on.
To Power Off:
Press and hold the Power/Mode Button for 3 seconds. The camera beeps while the camera
Working Indicator is off.
VIDEO RECORDING
In the Video mode, press the OK Button. The camera's Working Indicator will flash and a
Red Dot will show on the top of screen while recording.
To press the OK Button again. The camera's Working Indicator stop flashing and the Red
Dot disappear on the screen to indicate recording has stopped.
PHOTO
In the Photo mode, Press the OK Button. The camera's Working Indicator will flash while
recording, and stop to indicate photo capturing has stopped.
PLAYBACK and DELETE
In Video or Photo mode, swipe from up to down, or press Power/Mode Button, can enter
Mode button
OK Button
Case lip
Lens
Lens