Descargar Imprimir esta página

Rollei Actioncam D6Pro Manual Del Usuario página 25

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Distortion Correction: On / Off
n
Turn on Distortion Correction, it can correct the image distortion.
Click the video icon in the lower left corner of the video mode, you can enter the eight grids
to select various shooting modes.
Click the time-lapse icon to enter the time-lapse mode
Time-Lapse Video
Ø
In Video Mode, click the video icon in the lower left corner of the screen, enter the eight
grids to select various shooting modes.
Click the time-lapse icon, and enter the Time-Lapse mode
In Time-Lapse Video mode, click the
setting. Swipe the screen up and down to select the function you want, or use the Up and
Down buttons on the side to select the operation.
Video Lapse: Off / 1Sec / 3Secs / 5Secs / 10Secs /30Secs
n
Default setting is off.
Time Lapse Video creates video from frames captured at specific intervals. This option lets
you capture a time lapse event and immediately view or share it as a video.
Select 3 seconds means recording 3 seconds to get one frame per second.
For example: If you select 4K/30FPS and 3 secs, you need to record 90secs, then you can get
1 sec video for 4K/30FPS.
Note:
• Time Lapse Video is captured without audio.
• If you select Time-Lapse Video, the camera can not recorded the video over 30fps.
• If you select Time-Lapse Video, EIS,Loop Video,Slow Motion, Fast Motion and Auto Low
Light will not be available automatically.
Slow Motion
Ø
In Video Mode, click the video icon in the lower left corner of the screen, enter the eight
grids to select various shooting modes.
Click the Slow Motion icon, and enter the Slow Motion mode.
in the lower right corner, enter Time-Lapse

Publicidad

loading

Este manual también es adecuado para:

40194