Publicidad
FRONT PANEL
FRONTPLATTE
PANNEAU AVANT
PANEL DELANTERO
@ POWER switch
ON (-—) : Press to set to this position to
turn the power on,
STAND BY (EL): Press again
to
set to
this position to set to the STAND
BY
mode.
@ Power indicator
This
indicator
lights
when
the
POWER
switch is set to ON.
@ TAPE MONITOR switch
ON (-—) : Set to this position when you are
listening to the tape deck connected to
the SEA-33.
!f your tape deck is of the
three-head
type,
you
can
monitor
the
recorded
sound
while
recording
by
setting this switch to ON.
OFF
(ML)
: Set to this position except
when
you
are
listening
te
the
tape
deck connected to the SEA-33.
@ ATTENUATOR switch
-6 dB (==): This
switch
js used
to
at-
tenuate
for
sources
with
an
excessive
dynamic range such as a live performance
or high-level signals. It is not necessary
to set to this position normally.
0dB(L):
Leave
in
this
position
for
normal SEA compensation.
@ SEA switch
ON (SL) : Use this position for normal SEA
compensation.
DEFEAT
(-—) : To bypass the SEA circuit.
Convenient
for checking the SEA-com-
pensated signal and for comparison with
the origianl sound.
Q@SEA REC switch
ON (-=) : To record SEA-compensated sig-
nals.
OFF (.m.):To
record
tapes without
SEA
compensation.
@ Netzschalter (POWER)
ON (-=) ; Zum Ejinschalten driicken.
Netzanzeige
schalter eingeschaltet ist.
@ Tonbandschalter (TAPE MONITOR)
@ Dampfungsschalter (ATTENUATOR)
@ SEA-Schalter
ON (.aL) : Diese Position fir normale SEA-
Kompensation verwenden,
@ SEA-Aufnahmeschalter (SEA REC)
Publicidad
